DailyBuild Construction Daily Reports App
    Free Tool · No Signup

    Drywall Calculator

    Estimate drywall sheets, screws, joint compound, tape, and cost for any room - in imperial or metric units.

    Inputs

    Units

    Estimate only. Openings are deducted using typical sizes (about 21 sf / 1.95 m² per door, 12 sf / 1.11 m² per window). Order a spare sheet or two for damage and cuts.

    Results

    Drywall sheets
    20 sheets
    932 sf incl. waste
    Material cost
    $360
    Board only
    Screws
    800
    Joint compound
    13.0 gal
    Joint tape
    355 ft
    Net area
    847 sf
    Track materials on the jobsite

    How many sheets of drywall do I need?

    Divide the total wall and ceiling area, minus openings, by the area of one sheet, then add 10% for waste. A 4 x 8 ft sheet covers 32 sq ft, so a 12 x 12 ft room with 8 ft ceilings (about 384 sq ft of wall) needs roughly 13 sheets of drywall with waste included.

    Budget about 36 screws per sheet, 1.4 gallons of joint compound per 100 sq ft, and 38 linear feet of tape per 100 sq ft of board.

    How this drywall calculator works

    Wall area is the room perimeter - 2 x (length + width) - multiplied by ceiling height. If you include the ceiling, length x width is added on top. Doors and windows are deducted at 21 sf (1.95 m²) and 12 sf (1.11 m²) each, which matches typical 3'0" x 7'0" doors and 3'0" x 4'0" windows.

    Switch the unit toggle and your dimensions, sheet sizes, and results all convert - meters and square meters in metric, feet and square feet in imperial.

    The net area is bumped by your waste allowance (10% is standard for a rectangular room, 15% or more for lots of corners and soffits) and divided by the area of your chosen sheet.

    Finishing materials

    • Screws: about 36 per sheet for 16" (400 mm) on-center framing
    • Joint compound: roughly 1.4 gallons per 100 sf (5.7 L per 10 m²) through three coats
    • Joint tape: roughly 38 linear feet per 100 sf (12.5 m per 10 m²) of board

    Longer sheets create fewer butt joints and less finishing work, so use the longest board the room and access allow.

    Drywall sheet coverage

    Sheet sizeCoverageBest for
    4 x 8 ft (1.2 x 2.4 m)32 sq ft (2.98 m2)Standard rooms, easy to carry
    4 x 9 ft (1.2 x 2.7 m)36 sq ft (3.35 m2)9 ft ceilings, no butt joints
    4 x 10 ft (1.2 x 3.0 m)40 sq ft (3.72 m2)Long walls, fewer joints
    4 x 12 ft (1.2 x 3.6 m)48 sq ft (4.46 m2)Commercial walls and ceilings

    Drywall thickness by application

    ThicknessWhere it is used
    1/4 in (6 mm)Curved walls and skim-over layers
    3/8 in (9.5 mm)Repairs and double-layer work
    1/2 in (12.7 mm)Standard walls and ceilings at 16 in OC
    5/8 in Type X (15.9 mm)Fire-rated assemblies, garages, 24 in OC ceilings

    Waste allowance guide

    Room typeWaste
    Simple rectangular room10%
    Multiple corners, soffits, or bulkheads15%
    Cathedral or angled ceilings15-20%
    Small closets and bathrooms20%

    Worked example: 12 x 14 ft bedroom, 8 ft ceilings

    1. Perimeter: 2 x (12 + 14) = 52 ft. Wall area: 52 x 8 = 416 sq ft.
    2. Ceiling: 12 x 14 = 168 sq ft. Gross area: 584 sq ft.
    3. Deduct one door (21 sq ft) and two windows (24 sq ft): net 539 sq ft.
    4. Add 10% waste: 593 sq ft.
    5. Divide by 32 sq ft per 4 x 8 sheet: 19 sheets.

    Order 19 sheets, about 684 screws, 8.3 gallons of joint compound, and 225 ft of tape.

    Frequently asked questions

    How many sheets of drywall do I need?

    Add the wall area - 2 x (length + width) x ceiling height - plus the ceiling if you are boarding it, subtract door and window openings, add 10% waste, then divide by the area of your sheet. A 4' x 12' sheet covers 48 sf, so a 20' x 14' room with 9' ceilings needs about 21 sheets including the ceiling.

    How do I calculate drywall square footage?

    Square footage equals the room perimeter multiplied by the ceiling height, plus length x width if the ceiling is drywalled. Deduct roughly 21 sf per door and 12 sf per window. That net figure is your drywall square footage before waste.

    How much joint compound and tape do I need?

    Plan on about 1.4 gallons of all-purpose joint compound per 100 square feet of board across three coats, and about 38 linear feet of paper tape per 100 square feet. Textured or level-5 finishes use more mud.

    How many screws per sheet of drywall?

    About 36 screws per 4' x 8' sheet on 16-inch on-center framing - roughly every 12 inches in the field and every 8 inches on the edges. Ceilings and 24-inch on-center framing use a slightly tighter pattern.

    Is a sheetrock calculator the same as a drywall calculator?

    Yes. Sheetrock is a brand name for gypsum wallboard, so a sheetrock calculator and a drywall calculator do the same math. This tool works for any brand of 1/2 inch or 5/8 inch board.

    What waste factor should I use for drywall?

    Use 10% for a simple rectangular room, 15% for rooms with many corners, soffits, or angled walls, and up to 20% for small remodel patches where cuts are short and offcuts are unusable.

    How much does drywall cost per sheet?

    Board itself typically runs $14-$22 per sheet depending on thickness, size, and whether it is moisture or fire rated. Enter your local price above and the calculator returns board-only material cost - screws, mud, tape, and labor are extra.

    Embed this calculator on your site - free

    Paste this into any blog post or page. The widget resizes itself, needs no signup, and always shows the latest version. The only condition: keep the credit link to DailyBuild intact.

    <iframe
      src="https://dailybuild.co/embed/drywall-calculator"
      title="Drywall Calculator by DailyBuild"
      width="100%"
      height="720"
      style="border:0;width:100%;max-width:100%;"
      loading="lazy"
      scrolling="no"
    ></iframe>
    <p style="font-size:13px;margin-top:8px;">
      <a href="https://dailybuild.co/drywall-calculator" target="_blank" rel="noopener">Drywall Calculator</a> by
      <a href="https://dailybuild.co" target="_blank" rel="noopener">DailyBuild</a>
    </p>
    <script src="https://dailybuild.co/embed.js" async></script>

    Preview the widget: https://dailybuild.co/embed/drywall-calculator

    Track every material order in DailyBuild

    Log materials, photos, and daily progress from the field in minutes.

    Start Free Trial