Concrete Calculator
Estimate concrete volume, bag counts, and ready-mix cost for slabs, footings, and columns in imperial or metric units.
Inputs
Estimate only. Verify quantities against the structural drawings and order a small buffer - running short mid-pour is far more expensive than extra yardage.
Results
How much concrete do I need?
Multiply length x width x thickness in feet and divide by 27 to get cubic yards. A 10 x 10 ft slab at 4 in. thick is 33.3 cubic feet, or 1.24 cubic yards - order 1.35 yards with 10% waste.
In bags, that same slab takes about 74 sixty-pound bags or 56 eighty-pound bags. Past roughly 1 cubic yard, ready-mix is cheaper and far faster than bagged mix.
How this concrete calculator works
Volume is length x width x thickness for slabs and footings, and pi x radius squared x height for round columns. Cubic feet are divided by 27 to get cubic yards, the unit ready-mix is sold in. Switch the unit toggle to metric and the same math returns cubic meters instead - your entered dimensions convert automatically.
Bag counts use standard yields: a 60 lb bag of concrete mix yields about 0.45 cubic feet and an 80 lb bag about 0.60 cubic feet. In metric, a 20 kg bag yields roughly 0.0093 m³ and a 40 kg bag about 0.0186 m³. Bagged mix is practical up to roughly 1 cubic yard (0.75 m³) - past that, ready-mix is cheaper and faster.
Common slab thicknesses
- 4 in (10 cm) - sidewalks, patios, residential slabs
- 5-6 in (13-15 cm) - driveways and light vehicle traffic
- 6-8 in (15-20 cm) - heavy equipment, shop floors, and loading areas
Add 5-10% waste for spillage, uneven subgrade, and over-excavation. Most suppliers have a short-load fee, so ordering slightly long is usually the cheaper mistake.
Concrete bag yields
| Bag | Yield | Bags per cubic yard |
|---|---|---|
| 40 lb | 0.30 cu ft | 90 |
| 60 lb | 0.45 cu ft | 60 |
| 80 lb | 0.60 cu ft | 45 |
| 20 kg | 0.0093 m3 | 108 per m3 |
| 40 kg | 0.0186 m3 | 54 per m3 |
Slab coverage by thickness
| Thickness | Sq ft per cubic yard |
|---|---|
| 4 in (10 cm) | 81 sq ft |
| 5 in (13 cm) | 65 sq ft |
| 6 in (15 cm) | 54 sq ft |
| 8 in (20 cm) | 40 sq ft |
Typical concrete strength by use
| Application | Strength |
|---|---|
| Sidewalks and patios | 3,000 psi (20 MPa) |
| Residential slabs and driveways | 3,500 - 4,000 psi (25-28 MPa) |
| Footings and foundation walls | 3,000 - 4,000 psi (20-28 MPa) |
| Shop floors and heavy equipment pads | 4,500 psi+ (30 MPa+) |
Worked example: 20 x 24 ft garage slab, 5 in thick
- Area: 20 x 24 = 480 sq ft.
- Thickness in feet: 5 / 12 = 0.417 ft.
- Volume: 480 x 0.417 = 200 cu ft.
- Cubic yards: 200 / 27 = 7.41 yd3.
- Add 10% waste: 8.15 yd3.
Order 8.25 cubic yards of ready-mix. Bagged mix would take about 445 eighty-pound bags, which is why ready-mix wins at this size.
Frequently asked questions
How do I calculate cubic yards of concrete?
Multiply length x width x thickness in feet to get cubic feet, then divide by 27. A 20 ft x 10 ft slab at 4 inches thick is 20 x 10 x 0.333 = 66.7 cubic feet, or about 2.5 cubic yards before waste.
How many bags of concrete are in a cubic yard?
About 45 bags of 80 lb mix, 60 bags of 60 lb mix, or 90 bags of 40 lb mix per cubic yard. Bagged mix is practical up to roughly 1 cubic yard - past that, ready-mix is cheaper and faster.
How much extra concrete should I order?
Add 5-10% for subgrade irregularities, spillage, and over-excavation. Footings on soft ground often need more. Being short mid-pour creates a cold joint, so it is cheaper to over-order slightly.
How thick should a concrete slab be?
Four inches is standard for patios, walkways, and residential floors. Use 5-6 inches for driveways and anywhere vehicles or equipment will park, and follow the engineer's drawings for structural slabs.
How much does a yard of concrete cost?
Ready-mix commonly runs $140-$200 per cubic yard delivered in the US, plus short-load fees under about 5 yards. Enter your local quoted rate above to get a project-specific cost.
Does this concrete calculator work in metric?
Yes. Switch the unit toggle to metric and dimensions convert to meters with results in cubic meters, so you can estimate ready-mix in m3 as well as cubic yards.
Embed this calculator on your site - free
Paste this into any blog post or page. The widget resizes itself, needs no signup, and always shows the latest version. The only condition: keep the credit link to DailyBuild intact.
<iframe
src="https://dailybuild.co/embed/concrete-calculator"
title="Concrete Calculator by DailyBuild"
width="100%"
height="720"
style="border:0;width:100%;max-width:100%;"
loading="lazy"
scrolling="no"
></iframe>
<p style="font-size:13px;margin-top:8px;">
<a href="https://dailybuild.co/concrete-calculator" target="_blank" rel="noopener">Concrete Calculator</a> by
<a href="https://dailybuild.co" target="_blank" rel="noopener">DailyBuild</a>
</p>
<script src="https://dailybuild.co/embed.js" async></script>Preview the widget: https://dailybuild.co/embed/concrete-calculator
Related construction calculators
Track every material order in DailyBuild
Log materials, photos, and daily progress from the field in minutes.
Start Free Trial