DailyBuild Construction Daily Reports App
    Free Tool · No Signup

    CMU Block Calculator

    Estimate concrete block count, mortar bags, grout volume, and material cost for a masonry wall.

    Inputs

    Estimate only. Reinforcing, bond beams, lintels, and special shapes are not included. Follow the structural drawings for grouting and steel.

    Results

    Blocks
    378 pcs
    320 sf net wall face
    Material cost
    $832
    Block only
    Mortar (80 lb bags)
    13
    Grout
    0.69 cu yd
    Track materials on the jobsite

    How this concrete block calculator works

    A standard 8 x 8 x 16 in. CMU laid with a 3/8 in. mortar joint covers 0.889 square feet of wall face, which works out to 1.125 blocks per square foot. The calculator takes gross wall area, subtracts openings, applies that factor, then adds your waste allowance.

    Mortar is estimated at one 80 lb bag per 30 blocks. Grout volume is based on the cell volume of the block width you select and the percentage of cells you are filling - fully grouted walls use 100%, while typical reinforced walls with steel at 32 in. on center land near 25%.

    Quick reference

    • 113 standard blocks per 100 sf of wall
    • 3 bags of mortar per 100 blocks
    • 1 course of 8 in. block = 8 in. of wall height
    • Standard block actual size: 7 5/8 x 7 5/8 x 15 5/8 in.

    Frequently asked questions

    How many concrete blocks do I need?

    A standard 8 x 8 x 16 in. CMU covers 0.889 square feet of wall face including the mortar joint, so you need about 1.125 blocks per square foot. Multiply wall length x height, subtract openings, then multiply by 1.125.

    How many blocks are in 100 square feet of wall?

    About 113 standard 8 x 8 x 16 in. blocks per 100 square feet of wall face, before waste. Add 5% for breakage and cuts.

    How much mortar do I need for concrete block?

    Roughly one 80 lb bag of mortar mix per 28 to 32 blocks with 3/8 in. joints, or about three bags per 100 blocks. Wider joints and rough block faces increase consumption.

    How much grout does a CMU wall need?

    A fully grouted 8 in. wall takes about 0.8 cubic yards of grout per 100 square feet. Partially grouted walls with cells at 32 in. on center need roughly a quarter of that. Follow the structural drawings.

    How many blocks can a mason lay in a day?

    A mason with a tender typically lays 120-180 standard blocks per day on straight running-bond wall, less on corners, openings, and reinforced walls.

    What size are standard concrete blocks?

    Nominal 8 x 8 x 16 in. is standard, with an actual size of 7 5/8 x 7 5/8 x 15 5/8 in. so a 3/8 in. mortar joint brings it back to the nominal dimension. 4, 6, 10, and 12 in. widths are also common.

    Embed this calculator on your site - free

    Paste this into any blog post or page. The widget resizes itself, needs no signup, and always shows the latest version. The only condition: keep the credit link to DailyBuild intact.

    <iframe
      src="https://dailybuild.co/embed/block-calculator"
      title="CMU Block Calculator by DailyBuild"
      width="100%"
      height="720"
      style="border:0;width:100%;max-width:100%;"
      loading="lazy"
      scrolling="no"
    ></iframe>
    <p style="font-size:13px;margin-top:8px;">
      <a href="https://dailybuild.co/block-calculator" target="_blank" rel="noopener">CMU Block Calculator</a> by
      <a href="https://dailybuild.co" target="_blank" rel="noopener">DailyBuild</a>
    </p>
    <script src="https://dailybuild.co/embed.js" async></script>

    Preview the widget: https://dailybuild.co/embed/block-calculator

    Track every material order in DailyBuild

    Log materials, photos, and daily progress from the field in minutes.

    Start Free Trial