Rebar Calculator
Estimate reinforcing steel for slabs and footings in seconds. Get rebar count, total linear feet, and weight by bar size and spacing.
Inputs
Estimate only. Always confirm rebar quantity, size, and spacing against the structural drawings and local code.
Results
How do I calculate how much rebar I need?
Divide the slab length by the bar spacing and add one to get the number of bars in each direction, then multiply by the run length. A 20 x 30 ft slab with #4 bar at 12 in. on center needs about 51 bars each way, or roughly 1,250 linear feet of rebar.
Multiply linear feet by the bar weight per foot to get tonnage: #4 bar weighs 0.668 lb/ft, so 1,250 ft is about 835 lb of reinforcing steel before laps.
How this rebar calculator works
This free reinforcing steel calculator estimates the rebar you'll need for a flat slab or strip footing. Enter the pour dimensions, the on-center spacing for both directions, the bar size, and a lap-splice and waste allowance. The tool returns the total bar count, total linear feet, and total weight using standard ASTM bar weights (e.g. #4 = 0.668 lb/ft, #5 = 1.043 lb/ft).
Bar count in each direction is computed as (span ÷ spacing) + 1, so a 20 ft slab with 12 in. on-center spacing yields 21 bars in that direction. Most jobs add 10-15% for lap splices and cut waste; bump that higher for irregular shapes or heavy congestion.
Common rebar sizes and weights
- #3 (3/8") - 0.376 lb/ft, typical for stirrups and ties
- #4 (1/2") - 0.668 lb/ft, typical for residential slabs
- #5 (5/8") - 1.043 lb/ft, typical for footings and walls
- #6 (3/4") - 1.502 lb/ft, heavier footings and grade beams
- #8 (1") - 2.670 lb/ft, columns and structural slabs
Results are an estimate. Final quantities should always match the structural drawings, the engineer of record, and your local code requirements for cover, splice length, and development length.
Rebar size, diameter, and weight
| Bar size | Diameter | Weight per ft | Weight per m |
|---|---|---|---|
| #3 (10M) | 3/8 in (9.5 mm) | 0.376 lb | 0.560 kg |
| #4 (13M) | 1/2 in (12.7 mm) | 0.668 lb | 0.994 kg |
| #5 (16M) | 5/8 in (15.9 mm) | 1.043 lb | 1.552 kg |
| #6 (19M) | 3/4 in (19.1 mm) | 1.502 lb | 2.235 kg |
| #7 (22M) | 7/8 in (22.2 mm) | 2.044 lb | 3.042 kg |
| #8 (25M) | 1 in (25.4 mm) | 2.670 lb | 3.973 kg |
| #9 (29M) | 1-1/8 in (28.7 mm) | 3.400 lb | 5.060 kg |
| #10 (32M) | 1-1/4 in (32.3 mm) | 4.303 lb | 6.404 kg |
| #11 (36M) | 1-3/8 in (35.8 mm) | 5.313 lb | 7.907 kg |
Typical bar size and spacing by application
| Application | Bar size | Spacing |
|---|---|---|
| Residential slab on grade | #3 or #4 | 18 in OC each way |
| Driveway or patio | #4 | 16-18 in OC each way |
| Garage and shop slabs | #4 | 12 in OC each way |
| Strip footings | #4 or #5 | 2-3 continuous bars |
| Foundation walls | #4 or #5 | 12-16 in OC |
| Columns and grade beams | #5 to #8 | Per structural drawings |
Standard lap splice length (Grade 60, class B)
| Bar size | Typical lap |
|---|---|
| #3 | 15 in |
| #4 | 20 in |
| #5 | 25 in |
| #6 | 30 in |
| #8 | 41 in |
Worked example: 24 x 32 ft slab, #4 bar at 12 in OC
- Bars running the 32 ft direction: (24 x 12) / 12 + 1 = 25 bars x 32 ft = 800 ft.
- Bars running the 24 ft direction: (32 x 12) / 12 + 1 = 33 bars x 24 ft = 792 ft.
- Total: 1,592 linear feet before laps.
- Add 10% for laps and waste: 1,751 linear feet.
- Weight: 1,751 x 0.668 lb/ft = 1,170 lb.
Order about 1,750 linear feet of #4 rebar, roughly 1,170 lb (0.59 tons).
Frequently asked questions
How do I calculate how much rebar I need?
Divide each span by the on-center spacing and add one bar. A 20 ft x 12 ft slab at 12 in. on center needs 13 bars running the 20 ft direction and 21 bars running the 12 ft direction. Multiply each count by its bar length, add the two totals, then add 10-15% for lap splices and waste.
How much does rebar weigh per foot?
Standard ASTM weights are #3 = 0.376 lb/ft, #4 = 0.668 lb/ft, #5 = 1.043 lb/ft, #6 = 1.502 lb/ft, #7 = 2.044 lb/ft, #8 = 2.670 lb/ft, #9 = 3.400 lb/ft, #10 = 4.303 lb/ft, and #11 = 5.313 lb/ft.
What spacing should I use for slab rebar?
Residential slabs commonly use #4 bar at 16 or 18 in. on center each way; driveways and heavier slabs often use #4 or #5 at 12 in. on center. Always follow the structural drawings and your local code.
How much lap splice should I add?
A typical Class B tension lap is about 40 bar diameters - roughly 20 in. for #4 bar and 25 in. for #5 bar - but the engineer of record sets the real number. A 10-15% allowance in this calculator covers laps and cut waste on standard flat work.
How many tons of rebar is that?
Divide total pounds by 2,000. The calculator shows tons alongside the pound total so you can price steel by the ton and check truck loading.
Does this work for footings as well as slabs?
Yes. For a strip footing, enter the footing length and width and set the spacing for the transverse bars; for continuous longitudinal bars, use spacing equal to the bar layout shown on your drawings.
Related construction calculators
Track every pour - and every delay - in DailyBuild
Log materials, photos, and daily progress from the field in minutes.
Start Free Trial