Roofing Calculator
Estimate roof squares, shingle bundles, underlayment, nails, and material cost from footprint and pitch.
Inputs
Estimate only. Complex hip, dormer, and valley roofs need a measured takeoff. Ridge cap, starter strip, flashing, and drip edge are not included.
Results
How this roofing calculator works
The footprint - length plus twice the overhang, times width plus twice the overhang - is multiplied by the pitch multiplier to convert flat area into true sloped roof area. That area is increased by your waste allowance and divided by 100 to give roofing squares.
Shingle bundles assume three bundles per square, underlayment assumes four squares per roll, and nails assume four nails per shingle at roughly 2.5 lb per square.
Roof pitch multipliers
- 3/12 - 1.031
- 4/12 - 1.054
- 6/12 - 1.118
- 8/12 - 1.202
- 12/12 - 1.414
Roofs steeper than 6/12 also cost more to install because of staging and safety requirements, so factor that into labor pricing separately.
Frequently asked questions
How do I calculate roofing squares?
One roofing square equals 100 square feet of roof surface. Measure the building footprint, multiply by the pitch multiplier for your roof slope, then divide the result by 100.
What is the pitch multiplier for a roof?
The multiplier converts flat footprint area to sloped roof area. Common values are 1.03 for 3/12, 1.06 for 4/12, 1.08 for 5/12, 1.12 for 6/12, 1.20 for 8/12, 1.30 for 10/12, and 1.41 for 12/12.
How many bundles of shingles are in a square?
Three bundles of standard three-tab or architectural shingles cover one square (100 square feet). Heavier designer shingles can take four or five bundles per square.
How much underlayment do I need?
A standard roll of 15 lb felt covers about four squares and 30 lb felt about two squares; synthetic underlayment usually covers ten squares per roll. This calculator uses four squares per roll by default.
How many nails per square of shingles?
Four nails per shingle in normal wind zones works out to roughly 320 nails - about 2.5 lb - per square. High-wind areas require six nails per shingle, roughly 480 nails per square.
How much waste should I add for roofing?
Add 10% on a simple gable roof and 15% on hip roofs, valleys, or cut-up roofs with dormers, since starter courses and valley cuts create more offcuts.
Embed this calculator on your site - free
Paste this into any blog post or page. The widget resizes itself, needs no signup, and always shows the latest version. The only condition: keep the credit link to DailyBuild intact.
<iframe
src="https://dailybuild.co/embed/roofing-calculator"
title="Roofing Calculator by DailyBuild"
width="100%"
height="720"
style="border:0;width:100%;max-width:100%;"
loading="lazy"
scrolling="no"
></iframe>
<p style="font-size:13px;margin-top:8px;">
<a href="https://dailybuild.co/roofing-calculator" target="_blank" rel="noopener">Roofing Calculator</a> by
<a href="https://dailybuild.co" target="_blank" rel="noopener">DailyBuild</a>
</p>
<script src="https://dailybuild.co/embed.js" async></script>Preview the widget: https://dailybuild.co/embed/roofing-calculator
Related construction calculators
Track every material order in DailyBuild
Log materials, photos, and daily progress from the field in minutes.
Start Free Trial